Coquitlam Forklift Training School

Coquitlam Forklift Training School - Forklift Training School - Industry and federal regulators have established the criteria for forklift safety training based on their existing standards and regulations. People wishing to use a forklift must finish a forklift training program before using one of these equipment. The accredited Forklift Operator Training Program is designed to provide people training with the practical skills and knowledge to become a forklift operator.

There are forklift operation safety regulations which must be followed pertaining to pre-shift inspections, and regulations for loading and lifting.

An inspection checklist should be completed and submitted to the supervising authority prior to beginning a shift. When a maintenance issue is uncovered, the utilization of the particular machine should be stopped until the problem has been addressed. To indicate the machine is out of service, the keys should be removed from the ignition and a warning tag placed in a spot which is seen.

Loading safety rules comprise checking the rating capacity on the forklift nameplate and determining if the weight of the load falls within capacity. The forklift forks must be in the downward position when the forklift is starting up. Remember that there is a loss of approximately 100 pounds carrying capacity for every one inch further away from the carriage that the load is carried.

Lifting must begin with the driver moving to a stopped position approximately three inches from the load. The mast should then be leveled until it has reached a right angle with the load. Raise the forks to an inch under the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk to warn other staff. Do not allow forks to drag on the ground.

Click to Download the pdf